03/01/2017

LM1050 LCR Meter

LCR bridge, lcr testing LM1050 Lcr meter

LM1050 Advanced Precision LCR meter

Our most Advanced Meter
Up to 5Mhz test signal, accurate and reliable. Numerical and graphical result display.
Functions and Features
Very Easy to use, very powerful “all what you need” Instrument for variety of electrical and nonelectrical components.
Brochure

Download

Starting from:

€4059,00

LCR Meter: Functions and Overview

LM1050 series is a new generation impedance analyser. LM1050 answer all the measurement needs for components and materials with its high basic accuracy (0.05%),wide frequency range (from 20Hz to 5MHz) and impedance range (up to 100MΩ). The instrument is especially suitable for low dissipation factor (D) capacitors and high quality factor (Q) inductor measurements. List sweep function make it easy to extend user’s capability of component evaluation. LM1050 series is a powerful LCR meter for component design, component inspection, quality control and measurement on production lines. LM1050 is also a powerful tool for design and research of circuit and materials(electronic material and non- electronic material). Excellent performance of the LM1050 allows conformity to commercial and military standards for example IEC and MIL.

4 Parameters Display in any configuration

frequency response

Sweep / Frequency response function

10 Frequency Sweep of any parameter.

LCR Meter: Functions and Overview

ORDERING INFO:

LM1050A LCR METER

LM1050B LCR METER

STANDARD COMMUNICATION PORTS:

RS232, HANDLER/PLC, USB

 

IN THE BOX:

  • KA1004   4 terminal test fixture
  • KA1010   4 terminal Kelvin test clip leads
  • KA1008   Shorting plate
  • Mains Lead
  • Test Cerifiacte

 

OPTIONS:

  • KA1005   SMD test fixture - pin/leg type
  • KA1006   SMD test fixture -pad type
  • KA1007   SMD test tweezers
  • KA1025   GPIB interface
  • KA1022   DC BIAS 0V - 10V / 0 - 100mA
  • KA1023   DC BIAS 0V - 10V / 0 - 1A

 

Standard Accessories Included with every LM1050:
st26005a_1 656_0_st26010 331_2_st26011a-png

LM1050 Precision LCR Meter Overview:

LM1050A: 20Hz - 2MHz, selectable Frequency, 10mHz resolution
LM1050B: 20Hz - 5MHz, selectable Frequency, 10mHz resolution
• AC Signal:
f≤1MHz 10mV ~ 5V
f > 1MHz 10mV ~ 1V
• DC BIAS:
Internal:
-5V ~ +5V DC BIAS Voltage Source
Optional:
±10V, (±100mA) DC Bias
±10V, 0-1A DC Bias
• Basic Accuracy: 0.05%
• Parameters: |Z|,|Y|,L,C,R,G,D,Q,X,B,θ,DCR
• ALC - Automatic level control
• Frequency response Analysis
• 800 × 480 RGB 7 inch 16: 9 TFT LCD Monitor
• Direct reading, Δ, Δ%, V / I (measured voltage / current)
• 4 parameter dispaly in any configuartion
• Sweep Function: up to 10 points: test signal, DC BIAS
• Graphical results: trace sweep Function/frequency response
• Correction/Compensation
• RS232C, HANDLER, GPIB(optional)
• USB DEVICE (USBTMC and USBCDC support)
• USB HOST (FAT16 and FAT32 support)
• Beeper - result sound indication
• LED Indication of the result Green - PASS / Red - FAIL
• Key-Lock, Password protection
• Output Impedance: 10/CC(Constant Current), 30Ω,50Ω,100Ω
• Up to 75 Measurement/sec
• Trigger Function: Manual, Internal, External, BUS
• Internal Memory for 100 Instrument Settings
• Direct result, screenshots and settings saving to USB poratbale memory

LM1050 Lcr meter specification