16/12/2016

LM1020 LCR Meter

LM1020 LCR meter

LM1020 Precision LCR meter

Accurate & Reliable

Precision LCR meter packed with all functions and measurements needed both in Laboratory and production line.

Functions and Features

Selectable voltage, 37 Frequency points, DCR measurement, Variety of communication ports are just few to mention

Brochure

Download

Starting from:

€1556,00

LCR Meter: Functions and Overview

ORDERING INFO:

LM1020A LCR METER

LM1020B LCR METER

STANDARD COMMUNICATION PORTS:

RS232, HANDLER/PLC, USB

 

IN THE BOX:

  • KA1004   4 terminal test fixture
  • KA1010   4 terminal Kelvin test clip leads
  • KA1008   Shorting plate
  • Mains Lead
  • Test Cerifiacte

 

OPTIONS:

  • KA1005   SMD test fixture - pin/leg type
  • KA1006   SMD test fixture -pad type
  • KA1007   SMD test tweezers
  • KA1025   GPIB interface
  • KA1022   DC BIAS 0V - 10V / 0 - 100mA
  • KA1023   DC BIAS 0V - 10V / 0 - 1A

 

 The LM1020 is an auto component analyzer with high accuracy, wide measurement range and six digit resolution. LM1020 can be used for incoming inspection of components, quality control and laboratory use over a wide range of frequency(up to 200kHz). Test signal level of 5 mV to 2V allow precise choice of the test signal therefore more accurate results are achieved.

 

LM1020 Precision LCR Meter Overview:

• | Z |, | Y |, C, L, X, B, R, G, D, Q, θ, DCR
• AC Signal: 5mV-2V, 1mV Resolution
• 5” large graphic LCD display
• Up to 200 kHz test frequency
• 0.05% of the basic measurement accuracy, test speed (75 times / sec)
• Frequency response analysis and curve display function
• Selectable signal source output impedances: 30Ω and 100Ω
• Open, Short, and Load correction
• 10 points list sweep function
• Built-in comparator; 10-bin and bin counters
• Test signal level monitor: Volatge & Current (V&I)
• Automatic level control (ALC)
• 100 control setting files can be saved in the internal non-volatile memory
• RS232C, HANDLER(optional),USB(host) and GIPB(optional)
• 0V, 1.5 V and 2 V internal DC bias voltage
• Optional ±10V(±100mA) and 1A internal DC bias source
• 4 parameters on dispaly in any configuration
• LED Indication of the result Green - PASS / Red - FAIL

Standard Accessories Included with every LM1020:
st26005a_1 656_0_st26010 331_2_st26011a-png

LCR meter specification